miércoles, 26 de febrero de 2020

Some years ago I bought a TV and FM radio tuner card for my Desktop. The model chosen one was Sabrent TV and FM radio tuner:




Looking closely, I can see this on the card:



And this rare number:

TNF-5835-MFF


Surfing on internet, I discovered that this card use Conexant Fusion chipset and Tenna tuner. Installed in PCI port and running Debian Wheezy, I opened a terminal and type lspci command. The output is:

Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)

Again, surfing in internet I discovered that we need load only some modules. So I opened a terminal and type:

$ sudo pluma /etc/modprobe.d/bttv.conf

In that file, I filled with the follow:

options bttv card=142
options tuner=69
options radio=1
options pll=1

Save and exit.

$ sudo reboot

Watching TV:

Since 2005 the analog signal is no longer available in my country. Before that, I could watch TV with the tvtime program :-(

Listen FM radio:

OK. TV analog signal is not longer available but FM radio stations are broadcasting. To listen FM radio stations, we need a simple program. Then, we open a terminal and type:

$ sudo apt-get install radio

To scan FM radio stations, we run:

$ radio -i > ~/.radio

We listen a noise. Finish the radio scan, we can rerun the program:

$ radio

We can select the FM radio stations with F1-F8 keys and 'q' key to exit. Too, we can select any FM radio station with 'g' key and type the frecuency. Example: g-key + 96.9 + ENTER + ESC

To customize the radio file, check the manual for radio:

$ man radio

That's all.

Tuxkernel.

SOURCES:

BTTV card list: https://www.kernel.org/doc/html/latest/media/v4l-drivers/bttv-cardlist.html
Tuner card list: https://www.kernel.org/doc/html/v5.5-rc4/media/v4l-drivers/tuner-cardlist.html